TOTAL UPSTREAM NIGERIA LIMITED

1751
Advert

TOTAL UPSTREAM NIGERIA LIMITED

 

TENDER OPPORTUNITY FOR PROVISION OF SUBSEA TOPHOLE, METROLOGY & POSITIONING SERVICES FOR OML 130

 

  1. Introduction

Total Upstream Nigeria Limited (TUPNl) operator of the OML 130 issues tender opportunity to interested and reputable Contractors with suitable equipment and relevant experience for consideration to tender for the Provision of Subsea Tophole, Metrology & Positioning services for its Deep Offshore OML 130 operations.

Advert

 

  1. Brief description of Work Scope and Specification

The expected duration of this contract is two (2).

Selected CONTRACT shall perform the following but not limited to:

At worksite:

  • Site preparation including debris survey and spud marker buoy installation
  • Acoustic Ultra Short Baseline (USBL) Box-in calibration (Specifically for Appraisal Well)
  • Acoustic Long Baseline (LBL) array deployment and calibration
  • Positioning system verification
  • Gyrocompass Subsea / Surface Calibration
  • Position conductor pipe during seabed spud
  • Monitor Permanent Guide Base (PGB) during jetting of conductor pipe
  • Determine final position PGB, altitude, depth, heading, and attitude (pitch and roll)
  • Gyrocompass calibration on existing subsea structure
  • Determination of sound velocity at seabed (cross checked with different sensors) before “baseline collection” for acoustic local array measurement and adjustment, the sound velocity at the seafloor shall be measured and re-controlled upon the performance of the metrology.
  • Drill centre Long Baseline Line (LBL) acoustic array integrity check calibration
  • LBL extended and inner metrology array calibration
  • Determination of hub’s Attitude (Heading, Pitch & Roll)
  • Differential leveling between hubs
  • Processing and field report upon the completion of the work to provide the horizontal and vertical distances between connecting points and their misalignment angles (tilts values).

Contractor will have the responsibility to ensure that the equipment on board is 100% certified at the beginning of the project, and that equipment is in an excellent working order prior to each operation.

At Contractor’s base:

Contractor’s Base shall comply with the safety regulations and in particular with fire prevention, pollution and spillage control

Mandatory requirements

  • To be eligible for this tender exercise, interested suppliers are required to be pre-qualified in the 09.07 Surveying / Positioning Services categories of the NipeX Joint Qualification System (NJQS). All successfully pre-qualified suppliers in this category will receive an Invitation to Technical Tender (ITT).
  • To determine if you are pre-qualified and view the product/services category you are listed for: Open http://vendors.nipexjqs.com and access NJQS with your log in details. Click on Products/Services Status tab to view your status and product codes.
  • If you not listed in a Product/Service category but you are registered with Department of Petroleum Resources (DPR) to do business in the Nigerian Oil and Gas Industry, contact the NipeX administration office at 30 Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence for verification and necessary update.
  • To initiate the JQS pre-qualification process, you may access nipex-ng.com click on services tab followed by NJQS registration.
  • Only Nigerian indigenous service companies having verifiable Nigerian equity shareholding of 51% and above shall submit bids for this tender.

 

  1. Nigerian Content

TEPNG is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Content Act 2010 for Nigerian Content Development.

 

As from the commencement of this Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian oil and gas industry shall be consistent with the level set in the Schedule of the Act and any other targets as may be directed by the Nigerian Content Development and Monitoring Board (The Board).

 

Tenderer(s) shall comply with all the provisions of the Nigerian Content Act that relate to this advert and in particular comply with the minimum Nigerian Content percentage for the scopes which are covered in the Schedule of the Act. This also includes and any other requirement that may arise from time to time not explicitly stated in this advert but which apply to the services in fulfillment of the Nigerian Content Act, in the submission of their Tender.

 

Failure to fully comply with the Nigerian Content Act or demonstrate commitment to Nigerian Content Development policy for the Nigerian government shall result in the disqualification of the tenderer from the bidding process.

 

As part of their submissions, Tenderer shall:

  1. Develop a Nigerian Content Plan (NCP), which shall explain the methodology of how it intends to comply with the requirements of the Act and how to achieve the set target(s) in the Schedule of Nigerian Oil & Gas Industry Content Development Act and any targets set by the Board.
  2. Develop a Research & Development Plan which shall explain the methodology of how it intends to promote education, attachments, training, research and development in Nigerian in relation to the contract.
  3. Develop a Technology Transfer Plan which shall explain the methodology of how it intends to promote the effective transfer of technologies from alliances partners to Nigerian individuals and companies.
  4. Develop an employment and training plan which shall how first considerations shall be given to employment and training of Nigerians in work programme on the contract, hiring and training needs with a breakdown of the skills needed and anticipated skill shortage in the Nigerian labour force including the training and understudy program for succession planning.
  5. Submit a plan for how you intend to give first consideration to services provided from within Nigeria with a list of work packages, 3rd party services and subcontracts that should be reserved for Nigerian indigenous contractors and those for community contractors including the list of services that will be provided by companies for Nigerian origin.
  6. Submit a plan for how you intend to give first consideration to raw materials manufactured /assembled goods of Nigerian origin. This shall include a breakdown of all raw materials to be utilized and identify those that are found locally. Finished products and materials that will be procured from Nigerian Manufacturing & assembly plants; finished foreign goods that can be ordered by Nigeria through Nigerian authorized vendors and accredited agents and those that will be directly imported.
  7. Demonstrate that entity is a Nigerian indigenous company or an indigenous company in genuine alliance with a foreign-owned or institutional company registered in Nigeria. Submit certified true copies of CAC forms 10, 02 & 07 (or its equivalent; CAC 2.3. 2.4, 2.5, etc.) including company memorandum & article of association and/or evidence of entity’s incorporation, shareholding & ownership structure in Nigeria. Where applicable, evidence of the Partnership/JV Agreement (where applicable) between Indigenous Company and their alliances with duly signed exclusive binding Memorandum of Agreement by the CEO of the entities in the alliances.
  8. Provide detailed description of the location of in-country committed facilities & infrastructure (assets, equipment, technical office, and administrative space, storage, workshop, assembly area, repair & maintenance, testing, laboratory, etc.) in Nigeria to support this contract. Evidence that 50% of all equipment deployed to work by multinational and international companies is owned by the local subsidiaries is a necessity.
  9. Provide a project-specific training, man-hour budget, skill development and technology transfer plan for Nigerian personnel or indigenous business including evidence of past performance on training and development for Nigerians nationals & indigenous business. Plan for sponsorship of Nigerians to acquire competence and/or certification. Further development of local employees as professionals. Proposed training plan for Nigerians on the project including a brief training outline for OEM products, engineering, software & hardware, project management, procurement, construction, installation, start-up & commissioning, maintenance, testing and operations.
  10. Provide evidence (personnel list and positions with organization chart to substantiate) of percentage of management that are Nigerian Nationals and the percentage of the total workforce that are Nigerians.
  11. Submit tenderer’s corporate organization’s overall human resources structure (mgt., supervisors, senior & junior skilled officers etc.) identifying positions manned/occupied.
  12. Tenderer shall be expected to submit verifiable of the OEM’s Nigerian Content Equipment Certificate (NCEC) issued by NCDMB during the technical phase of bidding.
  13. All bidders during tendering shall demonstrate how the NC targets of the NOGICD Act would be achieved in accordance with the services.

 

NOTE: Failure to comply with the provision of the Nigerian Content Act 2010 or to demonstrate commitment to the development of the Nigerian Content policy shall result in the disqualification of the tenderer from the bidding process.

 

  1. Closing Date

Only suppliers, who are registered with 3.09.07 Surveying / Positioning services categories and LIVE as at 13th December, 2017, being the advert closing date, shall be invited to submit technical tenders.

 

Additional Information

  • Failure to provide any of the listed documents or information may automatically disqualify the tenderer.
  • All costs incurred in registering and prequalifying for this and other service categories in NJQS shall be borne solely by the Contractors/Suppliers.
  • This advertisement shall neither be construed as an Invitation to Tender (ITT) nor a commitment on the part of TEPNG to award a contract to any supplier and/or associated companies, subcontractors or agents.
  • The ITT and any further progression of this tender shall be via NipeX. Interested bidders are therefore advised to ensure that their profiles in NipeX are active with a valid official email address accessible by their organization as this shall be the only means to transmit the ITT.
  • Tendering process will be the NNPC contracting process requiring pre-qualified companies to submit technical tender first. Following a technical review, only technically and financially qualified contractors will be requested to submit commercial tenders.
  • Man-hour figures for Capital Project Portfolios are estimates to provide definition to the scope and do not constitute guaranteed quantities.
  • TEPNG will only recognize and correspond with duly authorized officers of the pre-qualified bidders and NOT through individuals or agents acting on their behalf.
  • Interested tenderer(s) should note that TEPNG has very cordial relationship with the host communities of the sites where these services will be performed based on existing Memorandum of Understanding (MOU). Prospective tenderer(s) will be required to implement the obligations of the MOU as part of their contract.

 

Please visit NipeX portal at www.nipex-ng.com for this advert and other information

 

NCDMB Certification Authorized number:

ES/NCDMB/CERT/TOTAL/NCP/13/09/17/TSD/SUBSEA TOPHOLE METROLOGY POSITIONING SERVICES OML 130

SOURCE: VANGUARD